FLOJET Double Diaphragm Pumps in Pakistan
Xylem is a leading water technology company committed to “solving water” by creating innovative and smart technology solutions to meet the world’s water, wastewater and energy needs.In a world of ever-growing challenges, Xylem delivers innovative water technology solutions throughout the cycle of water.
Flojet was established since 1975 as a manufacturer of special application pumps with an initial focus on the emerging cleaning machine market, XYLEM FLOJET
Technological strength
Our technological strength across the life cycle of water is second-to-none. From collection and distribution to reuse and return to nature, our highly efficient water technologies, industrial pumps, and application solutions not only use less energy and reduce life-cycle costs but also promote sustainability.
FLOJET Double Diaphragm Pumps
This G57 Flojet AODD pump has a tough polypropylene body and a Santoprene diaphragm. Flow rate up to 20 lpm, 1/2″ suction & discharge barbed fittings, 1/4″ compressed air inlet. It is very cost-effective, lightweight, and has a maintenance-free design.
ENGINEERIC is the supplier of FLOJET Double Diaphragm Pumps in Pakistan, Flojet air-operated double diaphragm pumps
FLOJET Double Diaphragm Pumps Air Driven Diaphragm Pump
Output: – up to 26.5 litres/minute (5.9 gallons/minute). Maximum pressure 6.9bar (100psi)
Capable of passing solids up to 3.2mm diameter
Corrosion Resistant Sanitary Design
Self-priming up to 4.5m
Pump can run-dry and handle liquids up to 49ºC (120ºF)
Max. Air Supply Pressure 6.9bar (100psi)
Packaged Dimensions: L:15.00 x H:15.00 x W:12.00cm
PRODUCT FEATURES of Flojet Double Diaphragm Pumps
Highest flow rate for any air pump of comparable size
Stall-proof design with patented shuttle valve
Easy installation with all quick disconnect ports
Robust design with durable integral mounting
Sanitary design with inset molded diaphragm
Leak-resistant radial seals, no critical O-ring seals
Quiet operation with a large exhaust muffler.FLOJET Double Diaphragm Pumps in Pakistan
The innovatively compact design features a patented shuttle valve that eliminates stalling and provides long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM, or FFKM elastomers, as well as quick-disconnect liquid and gas port fittings for easy installation.
ENGINEERIC is the supplier of Flojet Double diaphragm pumps in Pakistan.
DESCRIPTION
FLOJET Industrial Series Pumps are designed for general commercial and industrial applications. These pumps are constructed from a selection of materials for handling a broad range of chemicals.
Allowed fluids for Not Allowed fluids for Santoprene
® materials Santoprene ® materials Potable Water, Acids Oils, Solvents, Soaps with Alkaline, Soaps Solvents, D-Limonene, Alcohols, Ketones Aromatic Hydrocarbons
At start-up, regulate gas pressure to the desired setting. For most installations, 20 PSI (1.4 bar) inlet will be adequate, although DO NOT go below 20 PSI.
Air Supply:
The pump will operate according to the air supply. Flow and pressure can be adjusted by increasing or decreasing gas pressure to accommodate varying product viscosities, length of lines, or other installation conditions. Review flow curves located on page 1 for further assistance. High viscosity fluids and hose length will limit priming distance.
IF PUMP IS T0 BE USED IN HIGH FLOW, LOW-PRESSURE APPLICATIONS ADJUST GAS PRESSURE TO 20 PSI (1.38 BAR) ABOVE DISCHARGE PRESSURE.
CAUTION:
DO NOT EXCEED 100 PSI (6.9 bar) GAS INLET PRESSURE CONTINUOUS OPERATION AT 120°F (48.9°C) WILL REDUCE PUMP LIFE. AIR MUST BE DRY AND OIL-FREE.
Compressor:
Compressors must have dryers and/or a water separator in the air distribution system. Pumps that fail due to water in the air chamber will not be covered under the limited warranty.
GENERAL SAFETY INFORMATION
Protect yourself and others by observing all safety information. Follow all safety codes and the Occupational Safety and Health Act (OSHA).
CAUTION for Flojet Double Diaphragm Pumps
Do not clean or service FLOJET pumps, hoses or valves while the system is pressurized. Plastic CO2 air inlet ports do not have a check valve. Prior to cleaning or servicing, purge the pump by carefully tilting the pump so ports are facing up and remove the suction line from the source.
Turn air off and disconnect air inlet line. (Brass air inlet ports have a check valve) Flojet Pumps in Pakistan
PRODUCT FEATURESModel No.: G57 Series
Highest flow rate for any air pump of comparable size
Stall-proof design with patented shuttle valve
Easy installation with all quick disconnect ports
Robust design with durable integral mounting
Sanitary design with inset molded diaphragm
Leak-resistant radial seals, no critical O-ring seals
